25.04.2006, Corrosion protection
Certified by Dekra
|
Since mid-April, the products of our Partner Branopac have been tested and certified by DEKRA Testing & Inspection GmbH. This long serving supplier of corrosion protection materials to Antalis Industrial Packaging manufactures all types of these products in its factory in Lich. For example the well known brands BRANOROST corrosion protection paper, BRANOFOL M3 film or BRANOROST Chips. Specifically the following products, which are also featured in the Antalis Industrial Packaging range, were tested and certified: BRANOROST R and U, FERROGUARD, MULTIGUARD, and BRANOFOL M1 and M3. The materials were subjected to a corrosion-condense water test by DEKRA. Here, the product is combined with an appropriate test substrate (cast iron, steel or other metals) and exposed to 8 cycles of 16 hours, with a temperature of 50 degrees centigrade and 100% relative humidity. On top of that, it must resist an additional 8 hours at 23 degrees and 75% humidity. All tested products successfully underwent the examination. |
